SiliaSep Plungers

Plunger features include anti-fold spring to prevent kinked inlet lines and solvent resistent O-Ring. Connection is via a Female Luer-lok connection. Works perfectly with Silicycles 10mL and 60mL solid load cartridges.

Adaptors

Want to use our flash cartridges but your system doesnt have luer connections? No problem, simply attach the Biotage Adaptor Kit (PN: KAD-1006) to the existing Swagelock™ stainless steel connectors, which will allow them to connect to SiliCycle SiliaSep columns. This is only if you want to toggle between Biotage and SiliCycle columns, alternativly you can use our solvent line replacement kit below.

Solvent Line Kit

Changing the solvent line on a Biotage Horizon™, SP1 or SP4 Systems from the actual to a Luer- Lok one will allow direct connection of SiliaSep Flash Cartridges. No compression module will be needed from now on. To switch completely to the SiliaSep columns, simply unscrew the fittings that are currently installed on the Biotage systems and screw in the SiliaSep Solvent Line Replacement (PN: KAD-1014) with the luer connections we supply. The female luer, which connects to the top of the column, goes onto the flow outlet of the instrument (top hole on the instrument). The male luer fits on top of the slip tip on the bottom of the column and connects to the flow inlet of the instrument (coming out of the column).

Support Rings

Support rings will allow SiliaSep cartridges to stand on the Biotage SP1 & SP4 instruments.

Flashmaster Adaptor Kit

On FlashMaster systems, cartridges are running upside down (reversed). To use SiliaSep cartridges on any FlashMaster instruments, simply replace plungers used with an open-top cartridge from our SiliaSep FlashMaster Adapter Kit (PN: KAD-1016). One piece holds the cartridge in place while the other connects to the solvent line.